What are the precautions when processing stainless steel parts?

November 27, 2019

Nowadays, many factories that manufacture finished products need to find stainless steel "target=_blank> stainless steel tapping in order to improve some performance or reduce cost of the machine. The diameter of the bottom hole before the use of slotless taps is ., grinding depth and lateral advancement. Take a large value for the hour, and take a small value when the horizontal feed amount is large. The rough grinding depth is the fine grinding depth. The grinding depth should be reduced after dressing the grinding wheel.

B50GT0VZPJ1LRRX68LVYDYH

Fill the voids of the abrasive particles to cause the abrasive particles to lose their cutting action. At the same time, it will also cause chattering during the grinding process and scaly ripples. The longitudinal feed amount during the grinding of the outer circle, the coarse grinding time, the fine grinding time; the longitudinal feed amount during the inner circle grinding, the coarse grinding time, the fine grinding time; the outer diameter of the outer surface of the grinding wheel, When rough grinding, when grinding

When surface burn is found, the speed of the grinding wheel should be reduced to the workpiece speed. When the diameter of the workpiece is less than the surface fine grinding by the outer circle of the grinding wheel, the moving speed of the table is generally. Due to its harmfulness to the human body, a mixture of sulfurized oil and kerosene should be used. When the diameter of the reamer is large, internal cooling can be used.

Cnc Cutting Service
Hexagonal Nylon Nut
Square Nylon Nut
Nylon Lock Nut
Nylon Hexagon Nut
Nylon Nut
Stainless Steel Square Nut

前

私たちを苦しめます

著者:

Ms. She Chengen

Eメール:

sales@hobbycarbon.com

Phone/WhatsApp:

+8618927460800

人気商品

企業ニュース